Showing 1–16 of 85 results
Molex 2 pin Connector free standing
Part No: 03-09-2022
Part No: 03-09-2027
Molex 3 pin Connector free standing
Part No: 03-09-1031
Part No: 03-09-2032
New replacement 4 bank opto board for Williams system 11 pinball machines.
This board is a plug and play replacement for these obsolete boards.
Molex 4 pin Connector free standing
Part No: 143-20-8
5mm Fuse Clip, 5mm PCB MOUNT. Part No 1747437
These clips were used on WPC 95
Part No: 1847437
6.3mm Fuse Clip, PCB MOUNT. Part No 1847422
These clips were used on Earlier on Williams / Bally, Gottlieb, Stern and many other games
Part No: 1847422
AC line filter 5VK1
AC Power Line EMI Filter with quick connect tabs
Model JR-L006-N line filter 5VK1
Auxiliary power tap board for Spooky Pinball machines using the PinHeck CPU/Power Driver Board. This board piggybacks on top of the AUX_POWER connector on PinHeck boards (see secondary pictures above) and provides 4 duplicated 12v/5v power outputs for mods, toppers, etc.
Supported Game List:
Please note that this power tap DOES NOT work with America’s Most Haunted.
Direct replacement for Bally AS2518-22,AS2518-22, AS2518-25
Modern switching power supplies, high efficiency, Less Heat, No more big heat sinks. Keeps the backbox cooler. Upgrade your game with modern technology!
Full adjustable 190Vdc @ 50 watts like the original design for games with extra displays.
Short circuit protection on the high and low voltage power supplies. Forget about blowing and replacing every part in the old high voltage power supply because of one bad display.
+5vdc @ 5amp low voltage power supply. Extra power for popular LED style displays.
LED status indictors on all voltages.
Also using the latest MOSFET devices for solenoid drivers.
Lower on resistance MOSFET drivers means more responsive coils ?? better, faster pinball action.
All Solenoid MOSFET drivers have dual function LED indictors that indicate proper operation as well as indicating a fault condition such as a shorted coil. Makes game repairs fast and easy.
Fused flippers for added flipper circuit protection. No more blown board traces from a miss wired coil.
MPU fault protection circuit. Protects solenoid drivers and coils from shorts. Caused by a faulted MPU which locks on a solenoid.
Heartbeat status LED.
No obsolete components used.
BALLY WILLIAMS TRANSFORMER SCREW INSULATOR
Replace your old burnt out or hacked up power module board with this brand new ultimate replacement
This board is a direct replacement for Bally ( #AS-2518-54) Power Board
Extra Thick 3 oz. Copper with flooded ground plain
Heavy duty 35 amp rectifiers with heatsinks
Includes fuses, replacement standoffs, new hinges, and high voltage protective cover.
Just Plug and play
Bally reference no’s # AS-2518-54 and P-2948-413
Compatible with the following games
Eight ball Deluxe
Eight Ball Deluxe Limited Edition
Kings of Steel
Mr. & Mrs. Pacman
Speakeasy (2 and 4 Player)
X’s & O’s
Bally Rectifier Board
Part Number: 135-105
Heavy duty replacement rectifier board for early Bally and Stern pinball machines.
Replaces Bally AS-2518-18, AS-2518-49 and equivalent Stern boards (TA-100).
Features of the GPE replacement Rectifier Board:
— Drop in replacment for existing Rectifier boards.
— Replaced undersized bridge rectifiers with 35 amp, top mounted bridge rectifiers.
— Extra thick (3 oz) copper board construction — all traces exceed the current handling capability as defined in ANSI/IPC-D-275 and Military Standard MIL-STD-275E.
— Extensive use of thermally relieved power and ground planes to maximize current carrying capacity and heat dissipation.
— All high current connector contact positions have traces to bottom of board — This means no high current contacts rely on the connector’s plated through holes! This was a common cause of failures on the original rectifier boards.
— Uses high quality tin plated berylium copper fuse holders (Buss brand) for all fuses – both low and high current fuses.
— Covered fuse area for safety concerns. Cover easily removed from friction fit mounts. Cover is made from clear, flame retardent Makrolon plastic (same material used on fire fighter masks). Clear cover and mounting hardware is not shown in above picture.
— High power dissipating heat sinks on BR1, BR2 AND BR3.
— R1 and R2 power resistors values adjusted to reduce operating temperatures. NOTE – these resistors still operate at a highly elevated temperature.
— Solder mask over bare copper (SMOBC) circuit board construction — no bubbling of solder mask during soldering process while attaching transformer wires.
— Ground terminal screw connection provided for optional high current ground or alternate E8 connection.
— Top and bottom silkscreen markings of wire locations (“E” holes) to make installation easier.
— All “E” holes are thermally relieved to allow for solderability.
— Includes redundant E7 and E8 connections as on original.
Also includes redundant E9 and E10 connections to accomodate double wires as used on KISS, Space Invaders and Future Spa.
— This board was created by an engineer that designs high reliability satellite electronic systems. The result is a design that will provide decades of reliable and carefree service.
Effective with Serial Number 301 — All three bridge rectifiers now have heatsinks.
F1 — 10 Amp
F2 — 0.75 Amp Slow
F3 — 4 Amp
F4 — 5 Amp
F5 — 20 Amp
F6 — 3 Amp Slow
ONLY quality Buss or Littelfuse fuses are provided, no Chinese brand fuses!
Note — not all machines are fused the same. Refer to your game’s manual for proper fusing.
Games supported by the GPE Bally Rectifier Board:
Freedom, Night Rider, Evel Knievel, Eight Ball, Power Play, Mata Hari,
Strikes and Spares, Black Jack, Lost World, Six Million Dollar Man,
Playboy, Voltan, Supersonic, Star Trek, Paragon,
Harlem Globetrotters, Dolly Parton, KISS, Future Spa,
Space Invaders, Nitro Groundshaker, Silverball Mania, Rolling Stones,
Mystic, Hotdoggin’, Viking, Skateball, Frontier
Pinball, Stingray, Stars, Memory Lane, Lectronamo, Wildfyre, Nugent,
Dracula, Pinball, Trident, Hot Hand, magic, Meteor, Galaxy, Ali,
Big Game, Seawitch, Cheetah, Quicksilver, Stargazer, Nineball,
Iron Maiden, Viper, Dragonfist, Flight 2000, Free Fall, Lightning,
Split Second, Catacomb, Orbitor One
This board contains hazardous voltages. Never touch components on board with machine plugged in!
This board includes parts that normally operate at high temperatures (roughly 200F). Never touch board until components have cooled off!
Bally Ultimate Lamp Auxiliary Board
Alltek Systems Ultimate LED/ lamp Driver Board
Direct replacement for an AS-2518-14, AS-2518-23, and LDB-100 Flicker Free LED or Standard lamp Operation – one board works both options
only pinball replacement board to use the latest Surface mount
technology but also have through-hole spacing for standard parts. so if
you want to repair the board yourself you can still use old style parts.
All connectors are labeled for easy troubleshooting
All important signals now have test points
Plug and play replacement that you expect from Alltek system products.
Same Mounting holes
No obsolete Components used
lifetime Warranty – See Allteks warranty page for imformation for the complete details
Works in the following games
Eight Ball Deluxe LTD
Harlem Globe Trotters
Kings of Steel
Mr & Mrs Pacman
Nitro Ground Shaker
Six Millon Dollar Man
Speak Easy 2 & 4 Player
Strikes and Spares
X’s and O’s
Works in the Following Stern games
Works in The Following other games
Black Sheep Squadron