Showing 1–16 of 33 results
New replacement 4 bank opto board for Williams system 11 pinball machines.
This board is a plug and play replacement for these obsolete boards.
Auxiliary power tap board for Spooky Pinball machines using the PinHeck CPU/Power Driver Board. This board piggybacks on top of the AUX_POWER connector on PinHeck boards (see secondary pictures above) and provides 4 duplicated 12v/5v power outputs for mods, toppers, etc.
Supported Game List:
Please note that this power tap DOES NOT work with America’s Most Haunted.
Direct replacement for Bally AS2518-22,AS2518-22, AS2518-25
Modern switching power supplies, high efficiency, Less Heat, No more big heat sinks. Keeps the backbox cooler. Upgrade your game with modern technology!
Full adjustable 190Vdc @ 50 watts like the original design for games with extra displays.
Short circuit protection on the high and low voltage power supplies. Forget about blowing and replacing every part in the old high voltage power supply because of one bad display.
+5vdc @ 5amp low voltage power supply. Extra power for popular LED style displays.
LED status indictors on all voltages.
Also using the latest MOSFET devices for solenoid drivers.
Lower on resistance MOSFET drivers means more responsive coils ?? better, faster pinball action.
All Solenoid MOSFET drivers have dual function LED indictors that indicate proper operation as well as indicating a fault condition such as a shorted coil. Makes game repairs fast and easy.
Fused flippers for added flipper circuit protection. No more blown board traces from a miss wired coil.
MPU fault protection circuit. Protects solenoid drivers and coils from shorts. Caused by a faulted MPU which locks on a solenoid.
Heartbeat status LED.
No obsolete components used.
Replace your old burnt out or hacked up power module board with this brand new ultimate replacement
This board is a direct replacement for Bally ( #AS-2518-54) Power Board
Extra Thick 3 oz. Copper with flooded ground plain
Heavy duty 35 amp rectifiers with heatsinks
Includes fuses, replacement standoffs, new hinges, and high voltage protective cover.
Just Plug and play
Bally reference no’s # AS-2518-54 and P-2948-413
Compatible with the following games
Eight ball Deluxe
Eight Ball Deluxe Limited Edition
Kings of Steel
Mr. & Mrs. Pacman
Speakeasy (2 and 4 Player)
X’s & O’s
Bally Rectifier Board
Part Number: 135-105
Heavy duty replacement rectifier board for early Bally and Stern pinball machines.
Replaces Bally AS-2518-18, AS-2518-49 and equivalent Stern boards (TA-100).
Features of the GPE replacement Rectifier Board:
— Drop in replacment for existing Rectifier boards.
— Replaced undersized bridge rectifiers with 35 amp, top mounted bridge rectifiers.
— Extra thick (3 oz) copper board construction — all traces exceed the current handling capability as defined in ANSI/IPC-D-275 and Military Standard MIL-STD-275E.
— Extensive use of thermally relieved power and ground planes to maximize current carrying capacity and heat dissipation.
— All high current connector contact positions have traces to bottom of board — This means no high current contacts rely on the connector’s plated through holes! This was a common cause of failures on the original rectifier boards.
— Uses high quality tin plated berylium copper fuse holders (Buss brand) for all fuses – both low and high current fuses.
— Covered fuse area for safety concerns. Cover easily removed from friction fit mounts. Cover is made from clear, flame retardent Makrolon plastic (same material used on fire fighter masks). Clear cover and mounting hardware is not shown in above picture.
— High power dissipating heat sinks on BR1, BR2 AND BR3.
— R1 and R2 power resistors values adjusted to reduce operating temperatures. NOTE – these resistors still operate at a highly elevated temperature.
— Solder mask over bare copper (SMOBC) circuit board construction — no bubbling of solder mask during soldering process while attaching transformer wires.
— Ground terminal screw connection provided for optional high current ground or alternate E8 connection.
— Top and bottom silkscreen markings of wire locations (“E” holes) to make installation easier.
— All “E” holes are thermally relieved to allow for solderability.
— Includes redundant E7 and E8 connections as on original.
Also includes redundant E9 and E10 connections to accomodate double wires as used on KISS, Space Invaders and Future Spa.
— This board was created by an engineer that designs high reliability satellite electronic systems. The result is a design that will provide decades of reliable and carefree service.
Effective with Serial Number 301 — All three bridge rectifiers now have heatsinks.
F1 — 10 Amp
F2 — 0.75 Amp Slow
F3 — 4 Amp
F4 — 5 Amp
F5 — 20 Amp
F6 — 3 Amp Slow
ONLY quality Buss or Littelfuse fuses are provided, no Chinese brand fuses!
Note — not all machines are fused the same. Refer to your game’s manual for proper fusing.
Games supported by the GPE Bally Rectifier Board:
Freedom, Night Rider, Evel Knievel, Eight Ball, Power Play, Mata Hari,
Strikes and Spares, Black Jack, Lost World, Six Million Dollar Man,
Playboy, Voltan, Supersonic, Star Trek, Paragon,
Harlem Globetrotters, Dolly Parton, KISS, Future Spa,
Space Invaders, Nitro Groundshaker, Silverball Mania, Rolling Stones,
Mystic, Hotdoggin’, Viking, Skateball, Frontier
Pinball, Stingray, Stars, Memory Lane, Lectronamo, Wildfyre, Nugent,
Dracula, Pinball, Trident, Hot Hand, magic, Meteor, Galaxy, Ali,
Big Game, Seawitch, Cheetah, Quicksilver, Stargazer, Nineball,
Iron Maiden, Viper, Dragonfist, Flight 2000, Free Fall, Lightning,
Split Second, Catacomb, Orbitor One
This board contains hazardous voltages. Never touch components on board with machine plugged in!
This board includes parts that normally operate at high temperatures (roughly 200F). Never touch board until components have cooled off!
Bally Ultimate Lamp Auxiliary Board
Alltek Systems Ultimate LED/ lamp Driver Board
Direct replacement for an AS-2518-14, AS-2518-23, and LDB-100 Flicker Free LED or Standard lamp Operation – one board works both options
only pinball replacement board to use the latest Surface mount
technology but also have through-hole spacing for standard parts. so if
you want to repair the board yourself you can still use old style parts.
All connectors are labeled for easy troubleshooting
All important signals now have test points
Plug and play replacement that you expect from Alltek system products.
Same Mounting holes
No obsolete Components used
lifetime Warranty – See Allteks warranty page for imformation for the complete details
Works in the following games
Eight Ball Deluxe LTD
Harlem Globe Trotters
Kings of Steel
Mr & Mrs Pacman
Nitro Ground Shaker
Six Millon Dollar Man
Speak Easy 2 & 4 Player
Strikes and Spares
X’s and O’s
Works in the Following Stern games
Works in The Following other games
Black Sheep Squadron
Replacement Bally Mpu Module
The last MPU board you’ll ever need! If you own a Bally or Stern coin op pinball machine with an AS-2518-35 or AS-2518-17, AS-2518-133, AS-2962-7, A084-91603-AA44, MPU100 or MPU200 MPU board, this board is for you!
It’s a plug and play replacement that has every classic Bally and Stern pinball game program ROM on board. The Ultimate MPU board is a NEW and ENHANCED COMPUTER for your pinball machine. Some of the many features are:
All 93 games are dip-switch selectable.
New FREEPLAY setting for most games!
No batteries required. Simtek? chip with 100 year memory retention warranty
New advanced diagnostics.
Over-voltage protection circuit.
Auto-resetable fuse protection.
On-board Self-Test button.
Full static protection of on-board IC’s.
Test points for all DIP switches for easy testing.
One chip reset replaces the original 16-component reset from old board.
On-board reset switch for easy reset without game cycling.
On-board memory clear switch.
On-board power monitoring LED indicator.
Automatic zero-crossing detector circuit – No jumper required.
Easy read instructions for fast installation game repair.
Half size board fits existing mounting rails.
New, improved built in diagnostic program provides a Burn In feature and enhanced troubleshooting when used with optional ULTIMATE TEST CARD.
All board components labeled for easy identification.
Test points that allow easy troubleshooting.
All ICs socketed.
Schematic and manual included and available online. Email and phone support.
Lifetime warranty for home or commercial use.
Made and assembled in the USA.
Some Bally Games Supported include
*Bobby Orr Power Play
*Bally Eight Ball
*Bally Eight Ball Deluxe
*Bally Flash Gordon
*Bally Harlem Globetrotters
*Bally Star Trek
Display Power Supply Board For use Whitestar Games .
For use on Sega / Stern Pinballs
Part No 520-5138-00
Standard size dot matrix display as used by WMS, Data east and Stern Pinball Inc, Gottlieb and Capcom.
This is our most popular model and is easy to install no soldering required at all!
Just Plug and Play and off you go.
Fits most late model pinball machines including.
*Attack from Mars
*Creatures for the Black Lagoon.
*Cue Ball Wizard.<
*Gun’s and Rose’s
*Last Action Hero.
*Lord of the Rings.
*No Good Gofers.
*Red & Ted Roadshow.
*Rocky & Bullwinkle.
*Simpson’s Pinball Party.
*Star trek the next generation.
*Tales from the crypt.
*Tales of the Arabian Night.
*Terminator 3 Judgement Day.
*The getaway high speed 2.
*Theatre of Magic.
*World cup soccer 94.
*WWF Royal Rumble.
This is the new DRIVER BOARD for Gottlieb System 1 pinball machines. The System 1 games are:
# Asteroid Annie
# Buck Rodgers
# Charlie’s Angels
# Close Encounters
# Count Down
# Joker Poker
# Pinball Pool
# Roller Disco
# Solar Ride
This new board has several improvements over the original:
# Higher voltage rated transistors for longer life
# Logic level FETs for higher efficiency & lower heat generation
# Higher current rated ULN2803 replacing obsolete MPS transistors
# Simplified schematic using only one transistor type
# Printed component designators and connector functions directly on the board.
Also, most of the component designators are the same as original so that the original schematics can still be used.
Part No GDB001
At last, an easy replacement for those unreliable, unobtainable, un-repairable old Gottlieb System 1 pinball machine main computer boards. The wizards at Ni-Wumpf (an inside joke for Monty Python aficionados) created this new, half size computer and crammed ALL System 1 games into its dip-switch selectable memory! This board is a PLUG-IN replacement and upgrade for the CPU board. Simply change the switch settings and move the board from game to game. As an added bonus, extensive diagnostic routines have been added to each game??s software. Since it is constructed of easy-to-find parts, this board makes an excellent long-term investment for your Gottlieb machine. Comes with a detailed manual detailing set up, operation, diagnostics, and schematics. Includes a 30-day warranty.
Works in ALL of the following machines:
# ASTEROID ANNIE
# BUCK ROGERS
# CHARLIE’S ANGELS
# CLOSE ENCOUNTERS OF THE THIRD KIND
# HAUNTED HOUSE
# INCREDIBLE HULK
# JOKER POKER
# PINBALL POOL
# ROLLER DISCO
# SOLAR RIDE
Power Supply Gottlieb System 80
This is the New GPS081 Power Supply board for Gottlieb System 80 series games.
This newly designed unit runs cooler and more efficiently than the original board. It fits the following Gottlieb System 80 pinball machines:
# ALIEN STAR
# AMAZON HUNT
# ASTEROID ANNIE
# BLACK HOLE
# DEVIL’S DARE
# EL DORADO CITY OF GOLD
# FORCE II
# GAMES, THE
# GOIN NUTS
# HAUNTED HOUSE
# ICE FEVER
# JACKS TO OPEN
# JAMES BOND
# MARS GOD OF WAR
# PINK PANTHER
# Q*BERT’S QUEST
# RACK EM UP
# READY AIM FIRE
# ROYAL FLUSH DELUXE
# STAR RACE
# SUPER ORBIT
Gottlieb is a registered trademark owned by Gottlieb Development LLC
This is the new #GPS002 Gottlieb System 1 POWER SUPPLY BOARD. It’s a superior replacement for Gottlieb System 1 pinball games when compared to the original board. This plug and play unit has improvements in the areas of Heat Generation, Transformer Strain, Grounding, False Shutdown, Ease of Installation / Removal, Adjustment Elimination, Obsolete Part Elimination, and Aged Part Elimination.
Fits the following Gottlieb System 1 game titles:
# ASTEROID ANNIE
# BUCK ROGERS
# CHARLIE’S ANGELS
# CLOSE ENCOUNTERS
# COUNT DOWN<br
# INCREDIBLE HULK
# JOKER POKER
# PINBALL POOL
# ROLLER DISCO
# SOLAR RIDE
TECHNICAL FEATURES OUTLINE and DISCUSSION:
The original System 1 Power Supply was designed with linear voltage regulators for all DC outputs. These linear regulators include the high current +5V DC supply (which is internally current limited to approx 3.5A). The +5V supply alone can dissipate as much as 28 Watts of power in the form of heat. This heat generation is the reason the power supply PCB must be attached to a large metal heat sink / mounting plate. The full load efficiency of the original board can be no more than 36% (efficiency = Power Out / Power in = (5V*3.5A / 14V*3.5A)).
The inefficiency of the 5 volt supply under full load imposes a minimum of a 3.5A AC load on the +14V AC transformer. This high current causes premature aging of the transformer as well as the connectors in the path between it and the power supply. The GPS002 reduces the load on the +14V AC transformer to about 1.5A under the exact same +5V DC loading conditions!
A well-known design flaw in Gottlieb pinball power supplies (not just System 1) is the extremely poor grounding strategy. In most cases, if one ground pin becomes loose or has a cracked solder joint, the entire system can gyrate through powering cycles and cause erratic operation or damage to the system.
The GPS002 PCB eliminates this problem by grounding the power supply directly to the metal mounting bracket via 2 of it’s 3 mounting nuts. These holes are actually plated-through copper holes connected directly to the ground line of the board. The PEM nuts are then press fiit into these holes resulting in a solid ground connection to the backbox when reattached. No additional soldering is required.
Another well-known design flaw in the original System 1 power supply involves the Over Voltage Shutdown (OVS) feature. This feature uses a potentiometer to establish a threshold voltage to compare to the output voltage. If the output voltage exceeds this threshold voltage, the output is shunted to ground via a MOV (metal oxide varistor), causing the fuse to blow.
The OVS feature was implemented with a potentiometer that has moving parts exposed to environmental conditions such as heat, humidity, dust, etc. Problems arise when the aging potentiometer resistance changes, causing intermittent system shutdowns.
The GPS002 PCB has no moving parts (including potentiometers). It relies on the advanced design of the On Semiconductor parts to control this function. These components were not available at the time the original Gottlieb power supply board was manufactured.
Ease of Installation and Removal
Another common problem when working on a Gottlieb System 1 and System 80 power supplies is disassembling and reassembling the board and heat sink assembly. This is required whenever servicing the PCB because the solder connections are sandwiched between the PCB and the heat sink.
To disassemble the original power supply:
# 1. Unsolder the large TO-3 transistor
# 2. Remove the 2 TO-220 bolts and isolators
# 3. Remove the two screws that hold the board onto the heatsink.
Once disassembled, the board will not work because the TO-3 transistor has been removed. This makes troubleshooting very difficult.
To re-assemble, reverse the above procedure and apply fresh heat sink compound to the large transistors.
The GPS002 PCB eliminates this entire procedure. It only takes 3 screws to remove the board from the mounting plate. Once the board is removed, you can troubleshoot the board with the power on because you have not removed a TO-3 transistor! Reassembly is just re-attaching the 3 screws.
The original System 1 board has two potentiometers that require adjustment for output voltage level and over voltage protection (see above). These adjustments require the use of a volt meter, screwdriver, and an extra hand. The GPS002 eliminates all board adjustments. It is truly a “Plug and Play” design. No adjustments, no potentiometers, no voltmeter are required.
Obsolete Part Elimination
Several of the parts on the original System 1 board are no longer available. If you search hard enough, you can find parts that are similar, but the reliability of old stock components may be questionable.
The GPS002 is made completely from new components that are currently available from many different suppliers.
Aged Part Elimination
Almost all existing System 1 boards are populated with components that are ~25 years old. The quality/reliability of semiconductor products designed for today’s market are superior to those of the early 80’s.
Original electrolytic capacitors degrade with time and, though not yet defective, may not perform correctly.
At last, an easy replacement for those unreliable, unobtainable, un-repairable old Gottlieb System 1 pinball machine Pop bumper boards. and move the board from game to game. . Since it is constructed of easy-to-find parts, this board makes an excellent long-term investment for your Gottlieb machine. Comes with a detailed manual detailing set up, operation, diagnostics, and schematics. Includes a 30-day warranty.
Replacement Display Glass for GOTTLIEB® Alpha Numeric Display
Part No : GTBDIS20-T