Showing all 5 results



Product Description

Replacement Bally Mpu Module

The last MPU board you’ll ever need! If you own a Bally or Stern coin op pinball machine with an AS-2518-35 or AS-2518-17, AS-2518-133, AS-2962-7, A084-91603-AA44, MPU100 or MPU200 MPU board, this board is for you!

It’s a plug and play replacement that has every classic Bally and Stern pinball game program ROM on board. The Ultimate MPU board is a NEW and ENHANCED COMPUTER for your pinball machine. Some of the many features are:

All 93 games are dip-switch selectable.
New FREEPLAY setting for most games!
No batteries required. Simtek? chip with 100 year memory retention warranty
New advanced diagnostics.
Over-voltage protection circuit.
Auto-resetable fuse protection.
On-board Self-Test button.
Full static protection of on-board IC’s.
Test points for all DIP switches for easy testing.
One chip reset replaces the original 16-component reset from old board.
On-board reset switch for easy reset without game cycling.
On-board memory clear switch.
On-board power monitoring LED indicator.
Automatic zero-crossing detector circuit – No jumper required.
Easy read instructions for fast installation game repair.
Half size board fits existing mounting rails.
New, improved built in diagnostic program provides a Burn In feature and enhanced troubleshooting when used with optional ULTIMATE TEST CARD.
All board components labeled for easy identification.
Test points that allow easy troubleshooting.
All ICs socketed.
Schematic and manual included and available online. Email and phone support.
Lifetime warranty for home or commercial use.
Made and assembled in the USA.
Some Bally Games Supported include
*Bobby Orr Power Play
*Bally Centaur
*Bally Eight Ball
*Bally Eight Ball Deluxe
*Bally Flash Gordon
*Bally Harlem Globetrotters
*Bally Star Trek
*Bally Supersonic
*Bally Paragon

Bin: P05.1



Product Description

The ultimate replacement board for older model Stern Pinballs.
Just set the dip switches to the matching game that you own and plug and play no messy soldering required at all.
Don’t spend hundred’s of dollars with people that can say that they can fix the Stern Mpu boards as they have become to unreliable to be repaired any more.

Stern Pinball Games Covered are:
* Pinball * Sting Ray * Dracula * Wild Fyre * Lectromano.
* Nugent * Magic * Hothand * Memory Lane * Stars.
* Trident * Ali * Big Game * Catacomb * Cheetah.
* Dragonfist * Flight 2000 * Galaxy * Iron Maiden * lazer Lord.
* Lighting * Meteor * Nine Ball * Orbitor 1 * Quick Silver.
* Seawitch * Split Second * Star Gazer * Viper * Freefall * Cosmic Princess.

Replaces the Stern MPU 200 series.

Low power memory chip with AA batteries for memory or optional Dallas DS1220 for memory that eliminates the need for AA batteries.
Remote battery holder with 12 inch cable connection.

Over-voltage protection circuit.

Auto-resetable fuse protection.

On-board Self-test button.

Full static protection of on board IC’s.
Test points for all dipswitches for easy testing.
One chip reset replaces the 16-component reset on your existing board.

On-board reset switch for easy reset without having to turn off the game.

On-board memory clear switch.
On-board power monitoring LED indicator.
Selectable clock setting for Stern MPU-200.
Automatic zero-crossing detector circuit – No Jumper required.
Easy to read instructions allowing you to have your machine up and running very quickly.

Half size board that fits on the same mounting rails.
A much improved built in diagnostic program that provides a burn in feature and enhanced troubleshooting with our ULTIMATE TEST CARD.
All components labeled on the board for easy identification.
All IC’s are in machined sockets.
Test points that allow easy troubleshooting.
Schematic and manual included. Email and phone support.
Comes with a long Warranty for home or commercial use.
Made and assembled in the USA.

Bin: P05.4

Out Of Stock



Product Description

At last, an easy replacement for those unreliable, unobtainable, un-repairable old Gottlieb System 1 pinball machine main computer boards. The wizards at Ni-Wumpf (an inside joke for Monty Python aficionados) created this new, half size computer and crammed ALL System 1 games into its dip-switch selectable memory! This board is a PLUG-IN replacement and upgrade for the CPU board. Simply change the switch settings and move the board from game to game. As an added bonus, extensive diagnostic routines have been added to each game??s software. Since it is constructed of easy-to-find parts, this board makes an excellent long-term investment for your Gottlieb machine. Comes with a detailed manual detailing set up, operation, diagnostics, and schematics. Includes a 30-day warranty.

Works in ALL of the following machines:


Bin: P05.4

Out Of Stock



Product Description

The PI-1 board is a direct replacement board for the original Gottlieb System1 CPU board. It is professionally manufactured, built around a modern and fast MPU. Thanks to its strong reliability, its many new & innovative features and its multilingual menus (6 languages available), its success has kept growing since its creation in 2001.
The PI-1 board gives a boost of additional modern features in reliability and playability:

  • One board fits all games: forget all about specific game proms and dipswitches to set
  • The circuit boards are integrally gold-plated for an even longer durability and almost zero-wear of the edge connectors
  • All integrated circuits (ICs) are socketted (mostly on machine tool sockets) hence easily replaceable without need for specific tools, making maintenance easy and at a much lower cost
  • Integral hardware protections against the most common failures, such as high voltage shorts from playfield coils & switches and, against faults from the main power supply: prevention of most common & destructive failures
  • Additional advanced software protection against hang-up and data loss by built-in watchdog
  • Energy saving board which drains less than 10% of the original board’s current on +5V line
  • Set of monitoring lights for CPU activity and +5V
  • All game data (a.k.a. “bookkeeping”) stored in a non-volatile memory, no more battery leakage & corrosion
  • Monitoring LEDs for all 8 coils and status of outhole and slam switches: more diagnostics to fix faulty games’ playfields
  • Two additional header connectors for A1J6/A1J7 in case the original ones were too corroded to be usable still; the wires can then be rerouted onto those new headers
  • All connectors are double sided; in case the lower side solder pad is damaged it is possible to restore the contact with a double-sided edge connector
  • Entirely driven by text-style menus, no more obscure DIP Switches
  • Clearly readable on-display configuration menus & messages in French, English, German, Portuguese, Italian & Spanish
  • Installation manual in English with fully detailed yet simple explanations (so that anyone should be able to install the board)

Loads of new exciting features that may be enabled or disabled at will for full original game compatibility:
Playfield attract mode to scroll playfield lamps in game over as on modern games Skill shot upon ball launch: a precise target must be scored (randomly chosen among a given list for each game) to earn a bonus that increases with each success Multiple extraball, several extraballs can be cumulated per each ball in play Chance ball, gives the ball back if lost within a given time Top 5 high scores table with names and scrolling display Unlimited credits mode, no need for coins or to open up the coin door to add more plays Expert game level (points divided by 10 after 900,000 pts) 1-million points award Counts & displays score over 1,000,000 points; the scores display no longer rolls back to zero after 999,990 2 different tilt sensitivities Animated playfield lamps, the lamps of certain targets and rollovers flash briefly when scored Previous scores remembered at power-up Bonus up to 39,000 on certain games Provision for alternate game rules The Special feature can give 50,000 points or the extra ball feature can give 10,000 points: great for tournaments! A confirmation is now asked if the CREDIT button has been pressed to abort the game in play and restart a new one (kids..) Idle (power saving) mode that turns off the playfield lamps without any user’s action for a long time
New advanced tests
Testing for stuck switches specifically associated with coils Drastically enhanced test modes for individual coil/lamp/digit/switch testing, including those special lamp-mapped coils (as on Buck Rogers for example) Smart coils mode, drop target bank reset coils are triggered in case of need only (spares both fuses and components)
Flipppin’ marvellous novelties
Settings by means of a simple TV remote control (RCA Sony or multibrand), infrared sensor is optional Scores can be displayed on an optional giant 6-digit display (70cm x 20cm).



  • Cleopatra
  • Sinbad
  • Joker Poker
  • Dragon
  • Solar Ride
  • Count Down
  • Close Encounters
  • Charlie’s Angels
  • Pinball Pool
  • Totem
  • Incredible Hulk
  • Genie
  • Buck Rogers
  • Torch
  • Roller Disco
  • Asteroid An

Bin: P05.4


Out Of Stock

Ni-Wumpf Gottlieb® System 80 CPU Replacement Board


Product Description
Ni-Wumpf Gottlieb® System 80 CPU

The system 80 board is a plug-and-play replacement for the original Gottlieb® System 80 CPU. The CPU alone provides un-matched diagnostic functionality for the technician when troubleshooting where a game may be malfunctioning. The entire game software has been re-written with an emphasis on maintaining the timing and compatibility of the original board, but with the limitless opportunity of being able to customize game-play via access to the source code itself! It is the first CPU release of the ubiquitous programming core designed to address multiple game platforms.

Games Supported:

Black Hole, Haunted House, Spiderman, Panthera, Volcano, Devil’s Dare, Counterforce, Mars God of War, Circus, Time Line, Pink Panther, James Bond, Caveman

Direct replacement of original board with no cabinet modifications necessary3-month warranty on all boards
All game code is completely re-written with some minor Gottlieb glitches omitted.
Full text based diagnostics menu system that allow operator option settings (previously set via DIP switches) to be entered in directly via front door control.
Computer interface for detailed hardware testing and diagnostics above and beyond the front-door diagnostics.
This is just a list of user features! ?? wait until you uncover the online programming features of this board that allow you to completely rewrite the game logic!
Solenoid test that exercises each coil including lamp controlled coils (when set)
Duplicated original MPU functionality and adds many optional features including:
Free game mode
add-a-ball option to enable multiple free-balls awarded during a single ball.
Restore factory-settings option for quick reset of settings.
Fully readable alphanumeric display prompts.
Tilt setting adjustment for aggression level that display tilt warnings!
scrolling scoring of scores that exceed the display width constraints 6-digit and 7-digit displays!
Four high scores to date for multiple awards
Multiple game modes (for game customization’s)
Ball-save feature!
Customer FLASH programmable via PC connection.
Integration with G-Sound board
Serviceable and dense! All main board components are protected by TTL DIP chips for easy customer field service.
Battery-less operation all settings and high-score data are stored in NVRAM.
Designed for low-cost component repair and maintenance on I/O sensitive components (exposed to bad displays / bad driver boards, etc.)
Slam switch agnostic – stuck switches are ignored

Bin: P05.5