Showing all 8 results

COIL SLEEVE – 03-7066-2 1-11/16″

$0.99

Product Description

Coil sleeve – 1-11/16″
03-7066-2

1-11/16 inch overall length coil sleeve.

One of the best and cheapest ways to perk up your sluggish machine is to replace all of the coil sleeves.

Reference:

143-808
Williams / Bally 03-7066-2
Stern 545-5031-00
Gottlieb 5064

COIL SLEEVE – 03-7357 SHOOTER ROD

$1.32

Product Description

03-7357

2-1/4 inch nylon ball shooter sleeve used as linear bearing on Williams / Bally pinball machines.

This is the most common failure item on Williams/Bally ball shooter assemblies. Replace this nylon sleeve along with the 10-149 outer and 10-148-XX inner ball shooter springs for a complete rebuild of the ball shooter assembly.

Reference:

03-7357
3A-7357
Data East
Substitute for Capcom 26313. Trim as necessary.

Bin 4.5

COIL SLEEVE – 1-3/4 x 1/2 inch -Pt no 03-7066

$1.95

Product Description

Nylon coil sleeve (plastic tubing) is the most commonly used size on all brands of pinball machines.

Measures 1-3/4 overall length x 1/2 inch shaft Outer Diameter.

Typically found on pop bumper, slingshots, kickers, and early solid state and electromechanical flipper solenoid assemblies.

One of the best and least expensive ways to perk up your sluggish mechanical solenoid assemblies is to do a ‘shotgun’ replacement of all coil sleeves.

Reference:

  • Williams / Bally 03-7066
  • Stern / Sega / Data East 545-5411-00
  • Capcom PL00132-01
  • 260-0004-00
  • 545-5031-00
  • 3A-7066
  • 5064
  • A-5064
  • JJP 30-0014-28
  • JJP 30-000014-28
  • DP-01-10035
  • SLC-006

#03-7066
Bin 5.4

COIL SLEEVE – 2 3/4″ WITH FLANGE

$1.16

Product Description




Coil sleeve – 2-3/4 inch flange

03-7067-1



2-3/4 inch overall length coil sleeve with shoulder.



Typically used on up-kickers and special target assemblies.



One of the best ways to perk up your sluggish machine is to replace all of the coil sleeves.



Reference numbers are :



Williams / Bally 03-7067-1

3A-7067-1

Stern / Sega / Data East 545-5847-00

Gottlieb 5142

COIL SLEEVE – FLIPPER COIL 03 – 7665

$1.05

Product Description

2-3/16″ Coil Sleeve

This nylon sleeve is used on Williams post- 1980, Bally post- 1988, Stern post- 1999, Data East, and Sega flipper assemblies.

This is the standard flipper coil sleeve replacement for all newer pinball machines.

The least expensive way to perk up your sluggish machine is to replace all of your coil sleeves.

03-7066-5

2 -3/16 coil sleeve. Williams/Bally 03-7066-5

Stern/Sega/Data East 545-5388-00

Coil Sleeve 2 – 1/4″ Coil Sleeve Part no 2_25_

$1.10

Product Description

This is the proper coil sleeve for Williams System 6 and System 7 flipper assemblies.

This coil sleeve is slightly longer than the much more common 2-3/16″ sleeve. The extra 1/16 inch is needed to keep the flipper plunger return spring from getting wedged between the plunger and coil.