Showing all 10 results

COIL SLEEVE 03-7357 SHOOTER ROD

$1.32

Product Description

2-1/4 inch nylon ball shooter sleeve used as linear bearing on Williams / Bally pinball machines.

This is the most common failure item on Williams/Bally ball shooter assemblies. Replace this nylon sleeve along with the 10-149 outer and 10-148-XX inner ball shooter springs for a complete rebuild of the ball shooter assembly.

Reference:

03-7357
3A-7357
Data East
Substitute for Capcom 26313. Trim as necessary.

Bin: P04.5

COIL SLEEVE 03-7066

$0.99

Product Description

This nylon coil sleeve is the most commonly used length on all brands of pinball machines.
Typically found on pop bumpers, slingshots, kickers, and early solid state and electromechanical flipper assemblies.

The least expensive way to perk up your sluggish machine is to replace all of your coil sleeves.

The overall length is 1-3/4 overall length x 1/2 inch shaft Outer Diameter.

Reference Part Numbers:
Williams/Bally 03-7066.
Stern/Sega/Data East 545-5411-00.
Jersey Jack Pinball reference #30-000014-28.
American Pinball reference #PLS0035-00.

Bin: P04.5

 

 

;

COIL SLEEVE 03-7066-1

$1.42

Product Description

Coil sleeve – 2-3/4 inch flange

2-3/4 inch overall length coil sleeve with shoulder.

Typically used on up-kickers and special target assemblies.

One of the best ways to perk up your sluggish machine is to replace all of the coil sleeves.

Reference numbers are :

Williams / Bally 03-7067-1
3A-7067-1
Stern / Sega / Data East 545-5847-00
Gottlieb 5142

Bin: P04.5

COIL SLEEVE 03-7066-5

$1.32

Product Description

2-3/16″ Coil Sleeve x 1/2

This nylon sleeve is used on Williams post- 1980, Bally post- 1988, Stern post- 1999, Data East, and Sega flipper assemblies.

This is the standard flipper coil sleeve replacement for all newer pinball machines.

The least expensive way to perk up your sluggish machine is to replace all of your coil sleeves.

2 -3/16 coil sleeve. Williams/Bally 03-7064-5

Stern / Sega / Data East 545-5388-00, 260-0003-00

Bin: P04.5

Coil sleeve 03-7067

$0.99

Product Description

Nylon coil sleeve 1/2 OD shaft x 1-7/8 inch long with 1/8 inch flange

Reference:

  • 03-7067
  • A-6087
  • 4A-159

Bin: P04.5

.

 

 

Coil sleeve 03-7067-2

$1.89

Product Description

#03-7067-2

Nylon coil sleeve 1-11/16 Long measured end-to-end with inch flange x 1-/2 inch

Nylon coil sleeve (plastic tubing) is the most commonly used size on all brands of pinball machines.Typically found on pop bumper, slingshots, kickers, and early solid state and electromechanical flipper solenoid assemblies.

One of the best and least expensive ways to perk up your sluggish mechanical solenoid assemblies is to do a ‘shotgun’ replacement of all coil sleeves.

Common Parts Numbers for different Manufacturers

  • Williams / Bally 03-7066
  • Stern / Sega / Data East 545-5411-00
  • Capcom PL00132-01
  • 260-0004-00
  • 545-5031-00
  • 3A-7066
  • 5064
  • A-5064
  • JJP 30-0014-28
  • JJP 30-000014-28
  • DP-01-10035
  • SLC-006

Reference:

  • 03-7067-2

Bin: P04.5

Coil sleeve 03-7067-3

$1.10

Product Description

#03-7067-3

Nylon coil sleeve 1-7/8 measured end-to-end with 3/16 inch flange.The diameter is x 1/2 inch

Reference:

  • 03-7067-3
  • 3A-7067-3

Bin: P04.5

COIL SLEEVE 03-7067-5

$1.46

Product Description

Coil sleeve – 2-1/16 inch with flange

Coil sleeve – 1/2 x 2.187 inches with 3/16 inch flange.

Shoulder (extension) is 0.187 inch or 3/16 inch.

Reference::03-7067-5

Bin: P04.5

 

  • 03-7067-5
  • A-6087

 

 

Coil sleeve 03-7067-6

$2.04

Product Description

#03-7067-6

Nylon coil sleeve 2-11/16 Long measured end-to-end with inch flange x 1-/2 inch .

Reference:

  • 03-7067-6

Bin: P05.4

COIL SLEEVE A-5172

$1.82

Product Description

Coil sleeve Gottlieb® 1/2 inch OD x 2-1/2 long.

Used on drop target mechanisms.

Reference: #A-5172

Bin: P04.5