Product Description
T-Nut 10-32 – 3/4″‘ base – 7/16″ barrel. Sold in a pack of Ten
3-prong t-nut 10-32 thread, barrel height 7/16″ with 3/4″ diameter base.
These nuts are used on virtually every pinball machine ever produced.
Reference : # 4410-01118-00
Bin: P07.4
Product Description
#10-32 x 1/2″ #10-32 x 1/2″ Pan Head Screw Thread Cutting. Pack of Ten #237-6033-00
Product Description
wage head screw used to fasten coil stops to Stern flipper assembly bases.Possibly used elsewhere in use as well.
#10-32 x 3/8″ Serrated slotted Hex Washer
Sold in a pack of 10
Stern #237-5985-00.
Bin: P07.4
Product Description
#4-40 nylon lock nut (also referred to as a nylock).
Small lock nut used in some pinball machines.
Stern reference #240-5303-00.
Williams/Bally reference #4404-01119-00.
Bin: P07.4
Product Description
Sold in a Pack of Ten
Part no :240-5102-00_066-32 Nylon Lock Nuts (Nylocks).
Used in countless playfield applications on virtually every pinball machine ever built.
Bin: P07.4
Product Description
Part no : 4006-01004-10
Used in countless playfield applications on virtually every pinball machine ever built.
Sold in a Pack of Ten
Bin: P07.4
Product Description
Part no :4008-01003-04b pan screw Black oxide finish
Used in countless playfield applications on virtually every pinball machine ever built.
Sold in a Pack of Ten
Bin: P07.4
Out Of Stock
Product Description
6-32 x 3/8″ with built in washer pack of ten
Officially known as MS 6-32 x 3/8 P-RWH.
Used all over the playfield on most Williams/Bally games.
Williams/Bally reference #4006-01027-06.
Bin: P07.4
Product Description
#8-32 nylon lock nut (also referred to as a nylock).
Used in countless playfield applications on virtually every pinball machine ever built.
Sold in a pack of ten
Reference:
240-5005-00 zinc plated 6-32 stopnut
4406-01119-00 zinc plated 6-32 stopnut
Bin: P07.4
Product Description
Flatwasher Washer .390 x .625 x .059 Shooter rod. Part No 4700-00051-00
Williams/Bally reference #4700-00051-00.
Data East/Sega/Stern reference #242-5014-00.
Jersey Jack Pinball reference #95-002564-58-16.
Bin: P07.8
Product Description
Pop bumper bracket used on Williams / Bally and other brand pinball machine
For Bally / Midway games this product is not compatible.
B-7417
B-6823
Williams old 04-10888
Stern 515-5939-00
A-613-114
Bin: P08.5
Product Description
C-clip or for 3/8 inch shaft –
Part No:
20-8718-1
Bin: P08.2
Product Description
Leaf switch with actuator for flipper End Of Stroke.
Normally Open (N.O.) secondary EOS (end-of-stroke) switch used on lower flipper assemblies that activate additional upper flippers.
Usually stacked together with the Normally Closed ASW-A20-34 or 03-7811 EOS switch.
Replaces SW-1A-183
Reference:
Bin: P03.7
Product Description
C-clip or E Clip for 1/4 inch shaft –
Part No:
20-8712-25
Bin: P08.2