Product Description
#10-32 x 1/2″ #10-32 x 1/2″ Pan Head Screw Thread Cutting. Pack of Ten #237-6033-00
Product Description
wage head screw used to fasten coil stops to Stern flipper assembly bases.Possibly used elsewhere in use as well.
#10-32 x 3/8″ Serrated slotted Hex Washer
Sold in a pack of 10
Stern #237-5985-00.
Bin 7.4
Product Description
#4-40 nylon lock nut (also referred to as a nylock).
Small lock nut used in some pinball machines.
Stern reference #240-5303-00.
Williams/Bally reference #4404-01119-00.
Bin 7.4
Out Of Stock
Product Description
6-32 x 3/8″ with built in washer pack of ten
Officially known as MS 6-32 x 3/8 P-RWH.
Used all over the playfield on most Williams/Bally games.
Williams/Bally reference #4006-01027-06.
Bin 7.4
Product Description
Spring (black) – Ball shooter outer barrel
Williams Part No.: 10-149
Data East, SEGA, Stern Part No.: 266-5010-00
Part No:10149 BK
Bin:7.5
Product Description
Coil – flipper A-24-570/34-3600 Bally
#A-24-570_34-360
3 terminal, dual winding flipper coil is equivalent to
Reference:
A-24-570/34-3600
Wico 01-169100
Equivalent to Midway AC70-00023-0000
Equivalent to Midway AC70-00026-0000
Equivalent to Midway A365-00067-0021
Bin 6.4
Product Description
Shoe and shaft assembly for classic Bally pinball machines.
Ships fully assembled with the shoe and shaft, plastic flipper bat, and mounting screw.
Available in original white or custom black colors.
Bally reference #A-3394-6 (shoe and shaft flipper arm assembly) .
Bin 5.3
Product Description
Shoe and shaft assembly for classic Bally pinball machines.
Ships fully assembled with the shoe and shaft, plastic flipper bat, and mounting screw.(It comes with a screw holding bat and shoe together)
Bally reference no A-3994-5
Bin 5.3
Product Description
Shoe and shaft assembly for classic Bally pinball machines.
Ships fully assembled with the shoe and shaft, plastic flipper bat, and mounting screw.(It comes with a screw holding bat and shoe together)
Bally reference #A-2747-11 (shoe and shaft flipper arm assembly) & C-611-5 (plastic flipper bat).
Bin 5.3
Product Description
Ball 1-1/16 inch standard pinball
Standard case hardened carbon steel 1-1/16 inch diameter, 80 gram pinball used on all contemporary pinball machines built after 1950.
Beautiful mirror-like factory finish. Resistant to residual magnetism and exceeds factory specifications for hardness, roundness, and weight.
A rusty, scratched, or damaged ball will quickly ruin your playfield.
Replacing your old ball is the best thing to do to avoid against playfield wear.
PART NOS:
Bally M-168-26
Midway 0017-00009-0546
Williams 20-6500
Williams 20A-6500
Product Description
Leg bolt 3/8-16 x 2-1/2 inch acorn head 5/8 inch
#4322-01125-40
New, high quality chrome finish 3/8-16 thread with 5/8 inch acorn head pinball leg bolts.
2-1/2 inch length allows room for mounting cabinet protectors and accessories.
Used on most pinball machines. 8 bolts required per machine.
Reference numbers are:
Replacement for Gottlieb A-3775
Replacement for Gottlieb 3775
231-5000-00 Data East/Sega/Stern
231-5001-01 Data East/Sega/Stern
4322-01125-40 leg bolt bright plated
4322-01125-40BR leg bolt brass plated
4322-01125-40B leg bolt black oxide finish
Replaces 4322-01125-38 leg bolt (3/8-16 x 2-3/8 inches long)
Sold as individual item only
Product Description
C-clip or E Clip for 3/8 in shaft –
Part No:
#clip 0001
Product Description
C-clip or E Clip for 3/8 in shaft – ball shooter rod
C-Clip (C clip retaining clip) for most ball shooter rods.
Replaced by E clip.
Part No’s
#20-8712-37
#270-5012-00
P-2991-8
Bin 8.2
Product Description
Bally/Midway 1988 Escape from the Lost world, This kit contains all 40 rubbers needed to re-rubber your playfield.
Also comes with a playfield placement diagram
RK-1293-1