Showing 1–16 of 34 results

#10-32 Nylon Insert Lock Nut pack of ten


#10-32 Nylon Insert Lock Nut#

Part no :4410-01132-004410-01132-004410-01132-00
10-32 Nylon Lock Nuts (Nylocks).

Used in countless playfield applications on virtually every pinball machine ever built.

#10-32 Tee Nuts Pack of Ten



T-Nut 10-32 – 3/4″‘ base – 7/16″ barrel. Sold in a pack of Ten

3-prong t-nut 10-32 thread, barrel height 7/16″ with 3/4″ diameter base.

These nuts are used on virtually every pinball machine ever produced.
Reference : # 4410-01118-00

6-32 x 3/8″ with built in washer Part no


Product Description

6-32 x 3/8″ with built in washer pack of ten

Offically known as MS 6-32 x 3/8 P-RWH.

Used all over the playfield on most Williams/Bally games.

Williams/Bally reference #4006-01027-06.

8-32 Nylon Nuts Pack of Ten PART NO


Product Description

Standard 8-32 Nylon Nut

8-32 Nylon Nut used on many Pinball games made.
Sold in a pack of 10 high Quality Nylon Nuts

Used to secure ring and rod and other high vibration mechanical assemblies in Williams. Bally, and Stern games.

Sold in a pack of ten


240-5005-00 zinc plated 6-32 stopnut
4406-01119-00 zinc plated 6-32 stopnut



Product Description

Flatwasher Washer .390 x .625 x .059 Shooter rod ?? 4700-00051-00

Williams/Bally reference #4700-00051-00.
Data East/Sega/Stern reference #242-5014-00.
Jersey Jack Pinball reference #95-002564-58-16.


BALLY COIL – Aq 25 -500 /34-4500 FLIPPER COIL


Product Description

Coil – flipper AQ-25-500/34-4500

3 terminal, dual winding flipper coill used on many early solid state pinball machines including Bally and Stern.

It’s a good idea to change the EOS (end-of stroke) switch when replacing a flipper coil.


Replacement for A-25-500/34-4500
Replacement for J-25-500/34-4500



Product Description

Common solenoid coil used on many brands of pinball machines.

All coils come with new sleeves (coil tubing) where applicable.

Can be used to replace AE1-26-1200 coil with quick connect terminals. The AE-26-1200 requires soldering.
Replaces Bally E-184-243
Replaces Bally E-184-262
Replaces A-26-1200

Part No – Ae-26-1200



Product Description

shoe and shaft assembly for classic Bally pinball machines.

Ships fully assembled with the shoe and shaft, plastic flipper bat, and mounting screw.

Available in original white or custom black colors. Choose color from drop-down menu.

Bally reference #A-2747-11 (shoe and shaft flipper arm assembly) & C-611-5 (plastic flipper bat).

Bin 5.3





Shooter Rod Outer barrel Spring

Part no:10-149

Barrel shaped, bright finish shooter spring used on many brands of pinball machine ball shooter assemblies.


Game Plan: 06-30002A
Bally: SP-247 and 0010-00271-0000
Gottlieb 347 and 25878
Williams Part No.: 10-149
Data East, SEGA, Stern Pinball inc Part No: 266-5010-00

Bally Rectifier Board Part Number: 135-105


Product Description

Bally Rectifier Board

Part Number: 135-105

Heavy duty replacement rectifier board for early Bally and Stern pinball machines.

Replaces Bally AS-2518-18, AS-2518-49 and equivalent Stern boards (TA-100).

Features of the GPE replacement Rectifier Board:
— Drop in replacment for existing Rectifier boards.
— Replaced undersized bridge rectifiers with 35 amp, top mounted bridge rectifiers.
— Extra thick (3 oz) copper board construction — all traces exceed the current handling capability as defined in ANSI/IPC-D-275 and Military Standard MIL-STD-275E.

— Extensive use of thermally relieved power and ground planes to maximize current carrying capacity and heat dissipation.

— All high current connector contact positions have traces to bottom of board — This means no high current contacts rely on the connector’s plated through holes! This was a common cause of failures on the original rectifier boards.

— Uses high quality tin plated berylium copper fuse holders (Buss brand) for all fuses – both low and high current fuses.

— Covered fuse area for safety concerns. Cover easily removed from friction fit mounts. Cover is made from clear, flame retardent Makrolon plastic (same material used on fire fighter masks). Clear cover and mounting hardware is not shown in above picture.

— High power dissipating heat sinks on BR1, BR2 AND BR3.
— R1 and R2 power resistors values adjusted to reduce operating temperatures. NOTE – these resistors still operate at a highly elevated temperature.
— Solder mask over bare copper (SMOBC) circuit board construction — no bubbling of solder mask during soldering process while attaching transformer wires.

— Ground terminal screw connection provided for optional high current ground or alternate E8 connection.

— Top and bottom silkscreen markings of wire locations (“E” holes) to make installation easier.
— All “E” holes are thermally relieved to allow for solderability.
— Includes redundant E7 and E8 connections as on original.

Also includes redundant E9 and E10 connections to accomodate double wires as used on KISS, Space Invaders and Future Spa.

— This board was created by an engineer that designs high reliability satellite electronic systems. The result is a design that will provide decades of reliable and carefree service.

Effective with Serial Number 301 — All three bridge rectifiers now have heatsinks.

F1 — 10 Amp
F2 — 0.75 Amp Slow
F3 — 4 Amp
F4 — 5 Amp
F5 — 20 Amp
F6 — 3 Amp Slow
ONLY quality Buss or Littelfuse fuses are provided, no Chinese brand fuses!
Cable Ties
Note — not all machines are fused the same. Refer to your game’s manual for proper fusing.

Games supported by the GPE Bally Rectifier Board:
Freedom, Night Rider, Evel Knievel, Eight Ball, Power Play, Mata Hari,
Strikes and Spares, Black Jack, Lost World, Six Million Dollar Man,
Playboy, Voltan, Supersonic, Star Trek, Paragon,
Harlem Globetrotters, Dolly Parton, KISS, Future Spa,
Space Invaders, Nitro Groundshaker, Silverball Mania, Rolling Stones,
Mystic, Hotdoggin’, Viking, Skateball, Frontier

Stern (TA-100):
Pinball, Stingray, Stars, Memory Lane, Lectronamo, Wildfyre, Nugent,
Dracula, Pinball, Trident, Hot Hand, magic, Meteor, Galaxy, Ali,
Big Game, Seawitch, Cheetah, Quicksilver, Stargazer, Nineball,
Iron Maiden, Viper, Dragonfist, Flight 2000, Free Fall, Lightning,
Split Second, Catacomb, Orbitor One

This board contains hazardous voltages. Never touch components on board with machine plugged in!
This board includes parts that normally operate at high temperatures (roughly 200F). Never touch board until components have cooled off!



Direct replacement for Bally AS2518-22 or Stern SDU-100

Modern switching power supplies, high efficiency, Less Heat, No more big heat sinks. Keeps the backbox cooler. Upgrade your game with modern technology!

Full adjustable 190Vdc @ 50 watts like the original design for games with extra displays.

Short circuit protection on the high and low voltage power supplies. Forget about blowing and replacing every part in the old high voltage power supply because of one bad display.

+5vdc @ 5amp low voltage power supply. Extra power for popular LED style displays.

LED status indictors on all voltages.

Also using the latest MOSFET devices for solenoid drivers.

Lower on resistance MOSFET drivers means more responsive coils ?? better, faster pinball action.

All Solenoid MOSFET drivers have dual function LED indictors that indicate proper operation as well as indicating a fault condition such as a shorted coil. Makes game repairs fast and easy.

With Fused flippers for added flipper circuit protection. No more blown board traces from a miss wired coil.

MPU fault protection circuit. Protects solenoid drivers and coils from shorts. Caused by a faulted MPU which locks on a solenoid.

Heartbeat status LED.

No obsolete components used.

Games Included.


Mata Hari.


Six Million Dollar Man.

Hot Hand



Bobby orr Power Play.

Dolly Parton.

Harlem Globetrotters.

Centaur 1.

Future Spa



Product Description

Stern Ring and Rod Assembly B-695-3

Used on Gottlieb pinball games made between 1977 -1984

assembly is used by all manufacturers and is interchangeable with the following part numbers:


  • B-695-3
  • 1A-234
  • 312-504
  • Williams A-4754
  • Atari A004730-01
  • Bally A-1873
  • Capcom A-00374
  • Coffee-Mat 19509
  • Chicago Coin 231-1507 rods plus 312-504 ring
  • Gottlieb A-16634
  • JJP 11-5004-01
  • Playmatic AC-2
  • 60-1705
  • Replaces Data East / Sega / Stern 515-5085-00
  • Replaces Data East / Sega / Stern 535-5825-00

Used in these pop bumper and thumper bumper assemblies:

  • B-9414
  • B-9141-2
  • B-9414-3
  • A-12872-1
  • C-12872
  • B-13123
  • A006049-01

Part no