Product Description
T-Nut 10-32 – 3/4″‘ base – 7/16″ barrel. Sold in a pack of Ten
3-prong t-nut 10-32 thread, barrel height 7/16″ with 3/4″ diameter base.
These nuts are used on virtually every pinball machine ever produced.
Reference : # 4410-01118-00
Bin: P07.4
Description
1-1/2″ outer diameter brown rebound rubber.
1/4″ inner diameter; 1/2″ thick.
Williams/Bally reference #23A-6316.
Gottlieb reference #A-1344.
Old Stern reference #A-105.
Bin: 1.9
Product Description
Flatwasher Washer .390 x .625 x .059 Shooter rod. Part No 4700-00051-00
Williams/Bally reference #4700-00051-00.
Data East/Sega/Stern reference #242-5014-00.
Jersey Jack Pinball reference #95-002564-58-16.
Bin: P07.8
Product Description
Ball shooter guide Gottlieb Nylon T Shape
Part no A-8834
Bin: P07.9
Product Description
Spring (black) – Ball shooter outer barrel
Williams Part No.: 10-149BK
Data East, SEGA, Stern Part No.: 266-5010-00
Part No:10-149 BK
Bin: P07.5
Product Description
Gottlieb® Pinball Bumper Pool White Rubber Kit
This 43 piece Black rubber ring set for the Gottlieb® Bumper Pool pinball machine.
The kit includes white O-ring bumper rubbers, ball shooter tip, rebound rubber,
And also a playfield rubber placement diagram. and a rubber sizing chart
RK-1553-1
Product Description
C-clip or for 3/8 inch shaft –
Part No:
20-8718-1
Bin: P08.2
Product Description
C-clip or E Clip for 1/4 inch shaft –
Part No:
20-8712-25
Bin: P08.2
Product Description
C-clip or E Clip for 3/8 in shaft –
Part No:
#clip 0001
Bin: P08.2
Product Description
C-clip or E Clip for 5/16 in shaft –
Part No:
20-8712-31
Bin: P08.2
Product Description
C-clip or E Clip for 7/16 in shaft –
Part No:
#clip 20-8712-43
Bin: P08.2
Product Description
C-clip or E Clip for 3/8 in shaft – ball shooter rod
C-Clip (C clip retaining clip) for most ball shooter rods.
Replaced by E clip.
Part No’s
#20-8712-37
#270-5012-00
P-2991-8
Bin: P08.2
Product Description
Coil – Solenoid Gottlieb®
Solenoid coil used in Gottlieb and other manufacturers pop bumper units.
This coil was manufactured two ways: with a diode for solid state games and without a diode for Electro Mechanical games. Remove diode when installed in EM games.
Reference:
Part No #A-4893
Bin: P06.4
Product Description
25 ohms
Reference:
A-9746
Bin: P06.5
Product Description
Ball 1-1/16 inch standard pinball
Standard case hardened carbon steel 1-1/16 inch diameter, 80 gram pinball used on all contemporary pinball machines built after 1950.
Beautiful mirror-like factory finish. Resistant to residual magnetism and exceeds factory specifications for hardness, roundness, and weight.
A rusty, scratched, or damaged ball will quickly ruin your playfield.
Replacing your old ball is the best thing to do to avoid against playfield wear.
Sold individually.
GOTTLIEB® -21864,MH31
Product Description
Gottlieb® A-5195 Solenoid Coil Also comes with a Sleeve
Also used as Gottlieb® Q*BERT Video game knocker coil
Reference:
0A-5195
26-1305 windings
11.6 ohms resistance (no diode)
Replacement for A-622
Replacement for A-1943
Replacement for A-12092
Bin: P06.4