Product Description
T-Nut 10-32 – 3/4″‘ base – 7/16″ barrel. Sold in a pack of Ten
3-prong t-nut 10-32 thread, barrel height 7/16″ with 3/4″ diameter base.
These nuts are used on virtually every pinball machine ever produced.
Reference : # 4410-01118-00
Bin: P07.4
Product Description
#4-40 nylon lock nut (also referred to as a nylock).
Small lock nut used in some pinball machines.
Stern reference #240-5303-00.
Williams/Bally reference #4404-01119-00.
Bin: P07.4
Product Description
Self-tapping screw used to fit together some Data East/Sega/Stern stand-up target mounting brackets and back plates.
Please note: Target in photo is for demonstration purposes only and is not included with the screw!
Data East/Sega/Stern #237-5976-05
Bin: P07.4
Out Of Stock
Product Description
6-32 x 3/8″ with built in washer pack of ten
Officially known as MS 6-32 x 3/8 P-RWH.
Used all over the playfield on most Williams/Bally games.
Williams/Bally reference #4006-01027-06.
Bin: P07.4
Product Description
#8-32 nylon lock nut (also referred to as a nylock).
Used in countless playfield applications on virtually every pinball machine ever built.
Sold in a pack of ten
Reference:
240-5005-00 zinc plated 6-32 stopnut
4406-01119-00 zinc plated 6-32 stopnut
Bin: P07.4
Product Description
Flatwasher Washer .390 x .625 x .059 Shooter rod. Part No 4700-00051-00
Williams/Bally reference #4700-00051-00.
Data East/Sega/Stern reference #242-5014-00.
Jersey Jack Pinball reference #95-002564-58-16.
Bin: P07.8
Product Description
Spring (black) – Ball shooter outer barrel
Williams Part No.: 10-149BK
Data East, SEGA, Stern Part No.: 266-5010-00
Part No:10-149 BK
Bin: P07.5
Product Description
Pop bumper bracket used on Williams / Bally and other brand pinball machine
For Bally / Midway games this product is not compatible.
B-7417
B-6823
Williams old 04-10888
Stern 515-5939-00
A-613-114
Bin: P08.5
Product Description
For use on Sega / Stern Pinballs
# 6 – 32 top/# 6 – 32 Bot
Machine Post/Stud 530-5012-02
Bin: P04.7
Product Description
For use on Data East/ Sega / Stern Pinballs opto Receiver Board
Dual-opto receiver board assembly with grommets for outhole trough upkicker for Stern pinball machines.
Typical symptoms of defective opto boards are multiple balls being served or continuously kicking ball shooters.
Part No 515-0174-00
Bin: P03.6
Product Description
SEGA, KICKBACK / KNOCKER PLUNGER 515-5002-02
Plunger used in Data East / Sega / Stern ball launch, kickback, knocker assemblies.
3-1/2 inch overall length with one piece end cap.
Reference:
Bin: P09-5
Product Description
Blue transparent plastic dome with screw tabs
Used on many manufactures pinball playfields for flash lamp covers.
Reference: 03-8149-10
Bin: P02.7
Product Description
Orange transparent plastic dome with screw tabs to give bright flash effect
Used on pinball playfields including:
Bally HARLEY DAVIDSON
Bally SHADOW
Williams HURRICANE
Williams JACKBOT
Part No: 03-8149-12
Bin: P02.7
Product Description
Plastic Dome – Green With Tabs
Part no’s
03-8149-26 (Williams/Bally)
550-5031-04 (Stern/DE/Sega)
Bin P02.7